Boat Canvas Cleaner

Before use

Test on an inconspicuous area first to ensure your fabric is colourfast dyed. Never use a pressure washer to clean fabric covers and canopies.

How to use

1. Remove residual dirt with a clean, dry brush.
2. Dampen surface with sponge or spray mist.
3. Shake bottle well and pour into suitable container.
4. Apply with a clean 5cm (2”) paint brush using even strokes.
5. Start at the centre and work out towards the edge.
6. Leave for 10-20 minutes (up to an hour for heavily soiled surfaces)
7. Scrub with warm water and sponge, cloth, or bristle brush until the cleaner begins to lather, and dirt is being removed easily.
8. Rinse, and repeat if necessary.

Bird droppings and difficult stains

Dab or pour cleaner directly onto stain and work into the affected area. Leave for 30 mins and rinse. Repeat if necessary.

Colour restoration and protection

We recommend using Renovo Boat Canvas Reviver and Renovo Boat Canvas Protector to prolong the life of the newly restored colour. Allow a good 24 hours to dry first.

Not for use on vinyl – use Renovo Boat Vinyl Cleaner.

For best results ensure you follow product label instructions.

Do not apply in direct sunlight or on particularly hot days as this may cause product to dry too quickly resulting in uneven results.

Avoid prolonged contact with skin. We recommend use of protective gloves whilst applying.

Coverage varies subject to age and condition of substrate.

Do not dilute or mix with other products.

Store in a cool place out of direct sunlight. Do not store at a temperature below 0°C (32°F).

This product is water based, non-toxic, and should reach you in perfect condition. If you require further information, please contact our customer services department on +44 (0)1444 443277.

Keep out of reach of children. In case of eye contact, flush out immediately with water. If problems persist, seek medical advice.