Fabric Soft Top Reviver

Before use

Before use we recommend using Renovo Fabric Soft Top Cleaner to thoroughly clean your soft top.

Ensure substrate is free of any previously applied water proofing agents.

How to use

1. Shake bottle, pour into a suitable container, and stir well
2. Using a 5cm (2”) paint brush, apply to the centre of your soft top. Ensure fabric is thoroughly wet and quickly progress towards the edges.
3. Wipe excess drips from paintwork, trims, and glass with a damp cloth.
4. When finished, clean brush in warm, soapy water.

Multiple coats

For sun-faded soft tops we recommend at least two coats for best results. Ensure Reviver is thoroughly dry before adding second coat. Ensure you have sufficient product for a complete coat before you start.

Drying time

Typically three hours, subject to ambient conditions. Do not take car out in wet weather until completely dry.

Colour protection

We recommend using Renovo Fabric Soft Top Protector to prolong the life of the newly restored colour.

Soft top interiors

This product can also be used to revive fabric soft top interiors.

For best results, use every 6 to 12 months.

Not for use on vinyl roofs.

For best results ensure you follow product label instructions.

Do not apply in direct sunlight or on particularly hot days as this may cause product to dry too quickly resulting in uneven results.

Avoid prolonged contact with skin. We recommend use of protective gloves whilst applying.

Coverage varies subject to age and condition of substrate.

Do not dilute or mix with other products.

Store in a cool place out of direct sunlight. Do not store at a temperature below 0°C (32°F).

This product is water based, non-toxic, and should reach you in perfect condition. If you require further information, please contact our customer services department on +44 (0)1444 443277.

Keep out of reach of children. In case of eye contact, flush out immediately with water. If problems persist, seek medical advice.