Vinyl Soft Top Cleaner

Before use

Test on an inconspicuous area first to ensure vinyl is colourfast dyed. Never use a pressure washer on your soft top. This product is not suitable for use on fabric soft tops.

Normal Cleaning

1. Shake bottle well and pour into suitable container.
2. Apply with a clean 5cm (2") paint brush using even strokes. Start at the centre of the cover and work towards the edge.
3. Leave for 10 to 20 minutes (less for a quick clean) to allow cleaner to penetrate stubborn grime and stains.
4. Scrub with warm water and a sponge, cloth, or bristle brush until cleaner begins to lather and dirt is visibly being lifted.
5. Rinse with water.
6. Repeat if necessary.

Heavily soiled surfaces

As above but leave the solution on for up to 40 minutes and use a bristle brush for more scrubbing power.

Bird droppings and difficult stains

Dab cleaner directly onto stain and massage in. Clean off after 30 mins. Repeat if necessary.

Maintenance

Once dry, protect your vinyl soft top with Renovo Vinyl Protector. For best results, use every six months.

Not for use on fabric soft tops - use Renovo Fabric Soft Top Cleaner and Renovo Fabric Soft Top Reviver.

For best results ensure you follow product label instructions.

Do not apply in direct sunlight or on particularly hot days as this may cause product to dry too quickly resulting in uneven results.

Avoid prolonged contact with skin. We recommend use of protective gloves whilst applying.

Coverage varies subject to age and condition of substrate.

Do not dilute or mix with other products.

Store in a cool place out of direct sunlight. Do not store at a temperature below 0°C (32°F).

This product is water based, non-toxic, and should reach you in perfect condition. If you require further information, please contact our customer services department on +44 (0)1444 443277.

Keep out of reach of children. In case of eye contact, flush out immediately with water. If problems persist, seek medical advice.