Test on an inconspicuous area to ensure canvas is colourfast dyed. Spray mist the boat cover with water.
Use a clean paint brush to apply. Leave on for 10–20 minutes for general cleaning.
Leave on for 40–60 minutes for stubborn dirt and to previous waterproofing treatments.
Wear protective gloves.
Use as often as required.
Don’t
Use a power jet wash to clean a boat cover.
Use a detergent based cleaner.
Apply in direct sunlight.
Forget to shake the bottle prior to use.
Boat Canvas Reviver
Do
Ensure the boat is thoroughly cleaned.
Ensure you have sufficient Boat Canvas Reviver to complete a full coat.
Be diligent in removing previous waterproof coatings prior to application of Boat Canvas Reviver.
Keep a soft damp cloth ready to wipe off any splashes or dribbles off the deck, windows and glass.
Work in a timely fashion to ensure that the edges of the freshly applied Boat Canvas Reviver do not dry out too quickly.
Work from the centre of the boat cover and as quickly as possible progress towards each side, the front and the back of the cover.
Apply to a dry cover and allow Boat Canvas Reviver to dry completely before applying further product or taking out in the rain.
Don’t
Forget to shake the bottle and stir well prior to use.
Dilute or mix the Boat Canvas Reviver with any other product.
Apply the Boat Canvas Reviver in direct sunlight, on a warm/hot boat cover or on a warm/hot day that will cause the Boat Canvas Reviver to dry too quickly.
Allow to dry on the deck, windows and glass.
Apply to a boat cover that has been coated with a waterproofing agent without removing the proofer first.
Apply to vinyl boat covers.
Apply to one half of the boat cover first as this will achieve a join line when starting the second half of the cover!
Marine Ultra Proofer
Do
Ensure the boat cover is thoroughly cleaned.
Ensure you have sufficient Marine Ultra Proofer to complete a full coat.
Keep a soft damp cloth at hand to wipe off splashes or dribbles on the deck, windows and glass.
Work in a timely fashion to ensure that the edges of the freshly applied Marine Ultra Proofer do not dry out too quickly.
Work from the centre of the boat cover and as quickly as possible progress towards each side, the front and the back of the soft top.
Apply to a dry cover and allow Marine Ultra Proofer to dry completely before applying further product or taking out in the rain.
Use at least every 6–12 months.
Don’t
Use on vinyl boat covers.
Forget to stir (not shake!) the Marine Ultra Proofer prior to use.
Dilute or mix the Marine Ultra Proofer with any other product.
Apply the Marine Ultra Proofer in direct sunlight, on a warm/hot soft top or a warm/hot day that will cause the Marine Ultra Proofer to dry too quickly.
Allow to dry on the deck, windows and glass.
Apply to vinyl boat covers.
Apply water proofing agent prior to using Boat Canvas Reviver.
Any proofer previously applied must be completely removed first.
Boat Vinyl Cleaner
Do
Test on an inconspicuous area to ensure vinyl is colourfast dyed.
Use a clean paint brush or sponge to apply.
Leave Boat Vinyl Cleaner on for 10–20 minutes for general cleaning.
Leave Boat Vinyl Cleaner on for 40–60 minutes for stubborn dirt.
Wear protective gloves whilst applying.
Allow to dry before applying Marine Vinyl Ultra Proofer.
Use as often as required.
Don’t
Use on canvas boat covers.
Use a power jet wash to clean a vinyl boat cover.
Apply in direct sunlight.
Forget to shake the bottle prior to use.
Marine Vinyl Ultra Proofer
Do
Ensure that the boat cover is thoroughly cleaned.
Ensure that you have sufficient Marine Vinyl Ultra Proofer to complete a full coat.
Keep a soft damp cloth ready to wipe off any splashes or dribbles off the deck, windows and glass.
Work in a timely fashion to ensure that the edges of the freshly applied Marine Vinyl Ultra Proofer do not dry out too quickly.
Work from the centre outwards round and round the boat.
Apply to a dry boat cover and allow Marine Vinyl Ultra Proofer to dry completely before applying further product or taking out in the rain.
Use at least every 3–6 months.
Don’t
Use on canvas boat covers.
Forget to shake the Marine Vinyl Ultra Proofer bottle prior to use.
Dilute or mix the Marine Vinyl Ultra Proofer with any other product.
Apply the Marine Vinyl Ultra Proofer in direct sunlight or on a hot day that will cause the Marine Vinyl Ultra Proofer to dry too quickly.
Allow to dry on the deck, windows and glass.
Apply to canvas boat covers.
Plastic Window Polish
Do
Apply with a clean soft polishing cloth.
Use small quantities of Plastic Window Polish working with circular motions in small areas a little at a time.
Allow Plastic Window Polish to dry then with a clean, soft cloth polish off using circular movements.
Apply to both interior and exterior of window.
Don’t
Forget to shake the bottle thoroughly prior to use.
Allow the Plastic Window Polish to come into contact with materials or fabric that surround the window.